Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

700c, 27-Inch & 650c

Shimano Dura-Ace R9100 C24 Carbon Clincher Wheelset 700c
$1,149.99
Shimano's Dura-Ace C24 series carbon clincher laminate wheelset, you’ll experience a faster, smoother and more responsive ride. Expect to out-accelerate and out-climb the competition. It boasts increased rigidity for improved drivetrain efficiency and lightweight titanium hubs for reduced friction. - 24mm rim depth - Wider hub flanges for increased stiffness - Clincher - Responsive acceleration - Carbon laminate rim
Roval CLX 50 Rear Wheel
$1,399.99
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in. When we set out to create the CLX 50, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, while taking some aero guidance from the CLX 64, if we were going to create what we like to call ""the unicorn wheel."" Even though the CLX 50 is similar in weight to many wheels in the ""lightweight"" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. After finding the optimized rim shape that supported our svelte weight requirements, we opted to lace the rims, via 21 DT Swiss Aerolite spokes, to our Aero Flange (AF) hub with the legendary CeramicSpeed bearings and DT 240 hub internals. And when it was time for final testing validation, we were left with a 50mm-deep, 770-gram clincher wheelset that's not only 200 grams lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon Fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 21 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 770g
Roval Rapide CLX 50 Front
$1,099.99
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in. When we set out to create the CLX 50, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, while taking some aero guidance from the CLX 64, if we were going to create what we like to call "the unicorn wheel." Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. After finding the optimized rim shape that supported our svelte weight requirements, we opted to lace the rims, via 16 DT Swiss Aerolite spokes, to our Aero Flange (AF) hub with the legendary CeramicSpeed bearings. And when it was time for final testing validation, we were left with a 50mm-deep, 1375-gram clincher wheelset that's not only 200 grams lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon Fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Front Hub: Roval AF1, CeramicSpeed bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 16 - Spoke Pattern: Radial - Spoke Type: DT Swiss Aerolite T-head - Weight: 607g
FSA NS 29-inch Tubeless Ready Wheelset
$450.00
FSA's NS Wheelset is a tremendous value in an alloy MTB, cyclocross, and gravel bike wheelset with renowned FSA reliability and high performance technology. Suitable for use on a wide range of price point bikes. - Asymmetric, 25mm deep x 26.1mm wide alloy rim - Tubeless compatible - Cartridge bearings (2F+4R) - 2-cross double butted spokes with brass nipples - Artisan built, entirely by hand - Includes tubeless valves (1 pair) and spoke protector - Compatible with cyclocross and gravel bikes
Zipp 30 Course Disc Brake Rear Wheel (Tubular)
$555.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more.
Zipp 30 Course Rim-brake Clincher
$555.00
Performance, durability, and versatility. Zipp checks all the boxes with its 30 Course Rim-brake Clincher wheelset. A wide 21mm internal rim profile delivers speed, stability and comfort over a variety of surfaces, and Zipp's 71/177 hubset provides smooth and efficient power transfer. Sapim CX-Ray spokes and redesigned ergonomic skewers round out this excellent all-around package. Each wheel includes rim tape, a tubeless valve, and a 1.85mm spacer for use with 10-speed cassettes.
Zipp Super-9 Disc Carbon Rear Wheel (Clincher)
$2,731.00
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
Whisky Parts Co. No.9 30w Front
$725.00
Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels we offer. No.9 30w rims have a 24mm internal width that works with a variety of tires from road plus to standard mountain sizes. No.9 30w rims feature hookless walls for easy tubeless setup and greater impact resistance. Whisky wheels are laced, tensioned, and hand-finished in Minnesota, where our experts have decades of experience building wheels one spoke at a time. Every wheel we sell comes with Whisky tubeless valves and tape in the box. And we’ve chosen each component with a focus on performance, reliability, and serviceability. 30w wheels use DT Swiss 350 hubs, which are well-known for their balance of performance, low weight, and tool-free serviceability. DT Aerolite spokes set the lightweight standard for wheel builders. We chose traditional, j-bend spokes and brass nipples for their durability and serviceability. Both are readily available at your local bike shop and ensure easy maintenance. The No.9 30w is light and wide, providing great versatility no matter where your ride takes you.
Sta-Tru 27-inch Front Wheel
$62.49
Sta Tru Front Wheel - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27" - ISO Diameter: 630 / 27" - Tire Type: Clincher
Sta-Tru 27-inch Rear Wheel
$65.49
Sta Tru Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27" - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 630 / 27" - Tire Type: Clincher
Roval Alpinist CLX Front
$1,100.00
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty - Front Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 21 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 562g
Roval Alpinist CLX Rear
$1,400.00
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty. - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings, DT Swiss EXP internals, HG Freehub, 142x12mm thru-axle compatible - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 24 - Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 686g
Roval CLX 32 Disc Tubular Front
$1,100.00
When we set out to create a lightweight tubular disc wheel, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest disc wheelset available with the aerodynamic attributes of something twice its depth. It was a tall order, but in the end, our CLX 32 Tubular Disc not only not only delivers on this in spades, but it also provides incredible brake modulation and power in all conditions, increased impact resistance, and a disc-specific carbon layup that increases strength while decreasing weight. Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category. For this CLX 32, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes to create the best overall system. This results in a 550-gram, front wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents. Each front wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag, Roval steel quick-release, 12mm thru-axle, quick-release end caps - Front Hub: Roval AFD1, Center Lock, CeramicSpeed bearings, quick-release or 12mm thru-axle end cap - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 32mm - Rim Material: Carbon - Rim Type: Carbon tubular - Rim Width: 27.1mm external - Spoke Count: 21 - Spoke Pattern: Two-cross/Radial (2:1) - Spoke Type: DT Swiss Aerolite (L)/Aerocomp (R) T-head - Weight: 550g
Roval CLX 32 Tubular Wheel
$659.95 - $999.99 $1,100.00 - $1,400.00 Up to 40% Off
The Roval CLX 32 Tubular wheels are some of the lightest carbon wheels ever made, but this doesn't come at the expense of fundamental performance. Instead, painstaking engineering and lab testing helped them achieve a 490-gram front and 665-gram rear wheel that's tough enough for cyclocross racing, yet light enough for the demands of a GC climber. The low inertia and ample stiffness help the wheel accelerate and change direction on a dime. We didn't skimp on aerodynamic benefits either, despite this wheel's low rim profile. The CLX 32 was engineered in CFD around a 26mm-wide tire shape, and honed in Roval's very own Win Tunnel, in order to be as aerodynamic as some rims almost twice its depth. Meanwhile, Roval aero hubs and CeramicSpeed bearings complete the fast-engaging ensemble. Truly, the CLX 32 ushers in a new era of lightweight performance road wheels.
Roval CLX 40 Tubular Wheels
$299.95 $1,000.00 70% Off
Slice through the wind on Roval's Rapide CLX 40 Wheelset. They feature 40mm-tall aero carbon rims, and DT Swiss Revolution straight-pull spokes laced to sealed ceramic cartridge bearings Roval hubs. The rear hub is adorned with DT Swiss's renowned 240 star ratchet internals. The wide, carbon rim provides a round tire profile and greater lateral stiffness for precise handling. This feathery, 1240-gram wheelset spins up with ease so you can bolt out of corners and breeze up the climbs. With your favorite tubular tires, these wheels roll as smooth as silk.
Roval CLX 64 Disc SCS System Rear Wheel
$979.95 $1,375.00 29% Off
Developed in Specialized's Win Tunnel, and designed to interface with the world’s fastest tire, the S-Works Turbo, the Roval CLX 64 Disc is one of the fastest disc brake road race wheel/tire system ever developed. The SCS hub allows for a proper chainline on short chainstay performance road and 'cross bikes. This wheel system comes complete with the S-Works Turbo tire which measures 24mm wide for enhanced stability and traction in corners and on descents. This rear wheel uses an AFD1 SCS Center Lock aero hub that's compatible with a QR or 12mm thru-axle.
Roval Terra CLX 700c Rear Wheel
$1,400.00
One wheel to rule all roads. Road light, off-road tough, smooth as butter, Terra CLX wheels bring leading-edge performance to the diverse needs of mixed-terrain rides. These are the lightest gravel wheel on the market. They sport 25mm internal-width rims, deliver a durable and exceptionally smooth ride, are compatible with 28-42mm tires at up to 90 PSI, and they come with a lifetime warranty and no-fault crash replacement. - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 25mm - Rim Depth: 32mm - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: 24 - Spoke Type: DT Swiss Aerolite T-head - Nipple Type: DT Swiss Pro Lock Alloy hexagonal - Spoke Length: Drive-Side/Non-Drive: 272mm/277mm - Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano HG, 142x12mm thru-axle end cap - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed) - Wheelset Weight (front and rear with rim tape and tubeless valves): 1296g
Roval Terra CLX Evo 700c Wheelset
$2,500.00
Where in the world can you ride these brutes? Anywhere you damn well please. Road light, off-road tough, smooth as butter, Terra CLX EVO wheels bring leading-edge performance to the diverse needs of aggressive gravel rides. Available in 700c and 650B with 30mm internal-width rims to deliver optimal handling with up to 2.1" tires, so you’re the master of any terrain. Durability delivered through unsurpassed toughness-to-weight, thanks to leading composite technology rims. Lifetime warranty and no-fault crash replacement. - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 30mm - Rim Depth: 25.3mm - Front Spoke Pattern: Radial/Two-cross (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: Front/Rear: 24/24 - Spoke Type: DT Swiss Aerolite T-head - Nipple Type: DT Swiss Pro Lock Alloy hexagonal - Spoke Length (front): 700c Right/Left: 283mm/279mm - Spoke Length (rear): 700c Drive-Side/Non-Drive: 278mm/284mm - Front Hub: Roval AFD1, Center Lock, 12mm thru-axle end cap - Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano or SRAM XDR, 142x12mm thru-axle end cap - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed) - Weight (with rim tape and tubeless valves): 700c: 1357g
Quality Wheels Formula / Alex AP18 27-inch Front
$59.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
Quality Wheels Shimano / Alex DC19 700c Rear
$85.00
Double-wall rims, Shimano hubs, DT-Swiss spokes and nipples - all at competitive pricing. These all-black wheels are the new standards in repair staples.
Quality Wheels Shimano Tiagra RS400 / Alex DA22 700c Front
$100.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.
Quality Wheels Shimano Tiagra RS400 / Alex DA22 700c Rear
$115.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.
Quality Wheels Track Front Wheel Formula Cartridge / Alex DA22 700c Front
$109.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices. - Cartridge bearing hub with solid axle
Easton EA70 SL Disc Front
$209.99
Our popular mid-level EA70 SL wheelset is now complemented with a new EA70 SL Disc wheelset to meet the growing demand for road and cyclocross disc wheels. Centered around our battle tested X5 mountain hub from the popular Heist wheelset we created the X5 CL hub, because Center Lock has seen strong adoption on the road. This wheelset uses double butted spokes to save weight and is finished with a deep 27mm rim for enhanced wheel stiffness and power transfer. A wide 19mm internal rim width insures optimal tire profile even for wider gravel and CX tires. The wheelset come tubeless ready with tape and valves installed and is available in all axle configurations.
Easton EC90 Aero 55 Rear
$1,075.00
Talk about features! These wheels have everything anyone could ever ask for: leading aerodynamics, certified Road Tubeless compatibility without rim strips, unrivaled braking performance, outstanding durability and competitive weight. Don’t take our word for it - check out the results from our exhaustive wind tunnel testing. Riding these wheels in a 40-kilometer time trial saves a whopping 14 seconds over the next fastest wheel. Riders concerned with finishing times and power output can’t afford not to buy these groundbreaking wheels. These aren’t simply race-day only wheels, they’re built strong. Easton’s industry-leading carbon lay-up process provides smooth, consistent braking. Like every high-end wheel in the Easton line, EC90 Aero 55 wheels are entirely built by hand from start to finish and acoustically tuned. These wheels combine top-end materials, a methodical build and an advanced rim design. They are extraordinarily fast wheels that will roll true for years to come.
DT Swiss ARC 1100 Dicut 48 Disc
$1,330.00 - $1,843.00
The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.
DT Swiss ARC 1100 Dicut 48 Non-disc
$1,316.00 - $1,830.00
The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.
DT Swiss ARC 1100 Dicut 62 Disc Rear
$1,330.00 - $1,843.00
Aero meets All-around: The ARC 1100 DICUT 62 is ridden by DT athletes in long distance triathlons, as well as in flat stages of the Tour de France. Adding to it's versatility is the Aero+ concept: It is the category leader when it comes to low drag numbers but at the same time it is easy to handle in every wind situation. Hubs equipped with SINC ceramic bearings and ultra-lightweight components throughout are there to make you roll smooth and fast, no matter if you're fighting against the wind on your time trial bike or trying to escape the bunch on the final meters to the line.
DT Swiss ARC 1100 Dicut 62 Non-disc
$1,316.00 - $1,830.00
Aero meets All-around: The ARC 1100 DICUT 62 is ridden by DT Swiss athletes in long distance triathlons, as well as in flat stages of the Tour de France. Adding to it's versatility is the Aero+ concept: It is the category leader when it comes to low drag numbers but at the same time it is easy to handle in every wind situation. Hubs equipped with SINC ceramic bearings and ultra-lightweight components throughout are there to make you roll smooth and fast, no matter if you're fighting against the wind on your time trial bike or trying to escape the bunch on the final meters to the line.
DT Swiss ARC 1100 Dicut 80 Disc
$1,330.00 - $1,843.00
If going flat out fast is what you want, then this wheelset has all the details covered. DT's top triathletes choose the ARC 1100 DICUT 80 when it's race day. It's developed in partnership with aerodynamics specialists SWISS SIDE and equipped with SINC ceramic bearings to get up to speed and stay there. Supporting the complete system of the rider and bike with minimal drag and unparalleled handling under all conditions, riding fast is guaranteed. Finally the precision wheel build with high and even spoke tension gives you the reliability to dominate all of the 180 km.
Page 1 of 3 Next page