Safety

•Handlebar mount •Fits most bikes •Alloy ringer style bell •53mm

•Classic Bugle design •Clamp fits most handlebars

Let everyone know your coming with Sunlite's Candy Mini Bell. It comes in a variety of colors to match your bike and gives you a resounding "ping." It fits most bars and can be used right or left handed.

Sunlite's HD II Mirror offers a nice, wide and clear view of what's behind so that you can ride more safely. It quickly and easily attaches to virtually any handlebar configuration. It's light and fully adjustable.

• Plastic body w/ ball joint • Acrylic convex mirror • Press fit into bar end

- Great novelty horn - Fits most handlebars

This little bell from Origin-8 is light and LOUD! A flick of your finger and the Ding! Ding! rings clear for all to hear.

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

The Mirrycle Road Mirror was developed exclusively to fit Shimano STI shifter/brake levers without interfering in any way. The Road Mirror fits almost all the different shift/brake combos. It goes on quickly and easily with the included tools. Just a flick of your eyes allows for a quick view behind. And, it can be attached to either the left or right side lever. Let's be careful out there.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

CatEye's handlebar-end mounted mirror is a great size for commuting or road riding. It's fully adjustable so you can comfortably see what's behind you, and works on either the left or right side. This scratch-resistant mirror installs easily and gives a wide-angle view.

- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter

- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount

The Third Eye Foam Helmet Mirror allows you to see what's coming behind you so you can ride defensively and stay safe on the road. The shatter-proof glass mirror is distortion-free and highly durable. It attaches to the inner or outer rim of almost any helmet with a high-tech product called Dual-Lock.

- The original third-Eye bar-End mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to most handlebar bar-End with a rubber, Internal-Expanding plug system

The Third Eye Hardshell Helmet Mirror clips on to all hardshell helmets and many helmet visors. Its distortion-free, shatterproof glass mirror allows you to see what's coming from behind so you can ride defensively and safely.

- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets

- Alloy lever action safety bells perfect for kids bikes - Sturdy alloy construction with an adorable insect or animal on top

- 22.2mm clamp - Right or left hand use - Alloy ping style bell

Let everyone know your coming with Sunlite's Big Ben Jr. Bell. A simple spin makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Sunlite's CE-1 Bar End Mirror offers a nice, wide and clear view of what's behind so you can ride more safely. It quickly and easily attaches to virtually any handlebar configuration. And, it's light and fully adjustable.

• Plugs inside handlebar end • 360° adjustable • ABS plastic body

•Great novelty Horn / Bell combination •Combination of Ringer bell and Squeeze horn •Fits most handlebars

•Combines Ping bells and streamers •One bell on each end of the handlebar •Mounts inside handlebar under grips •Optional hand held use

•Lightweight, compact design •Easy-read compass •Alloy construction

See what's behind you with Sunlite's Deluxe MTB Mirror. It quickly and easily attaches to virtually any handlebar configuration with a Velcro strap. It's light, scratch resistant, and fully adjustable.

• Reflector on back • Extra large • 6" stem

• Front reflector (white) • Rear reflector (red) • Two wheel reflectors (white) w/spoke attachments