Parts

The beautiful Big Block track fork is available in both 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike. - Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts - Axle to Crown Length: 375mm - Offset: 32mm - Steerer Tube Length: 300mm - Spacing: 100mm - Tire Clearance: 32c - Brake Mount (Fork): mid reach caliper (47mm - 57mm)

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

- Pre-stretched, Teflon coated 19 strand inner wire

- Pre-stretched, stainless 19 strand inner wire - Slick profile for smooth performance

- Cable and housing set with special ferrules and end caps - Anti-compression housing reinforced with Kevlar and super slick inner sleeve - Prestretched stainless steel inner cable with slick outer profile - Rubber donut frame protectors included - SRAM and Shimano compatible

With a stiff, one-piece, co-molded design, Box Three™ Air Flow Brake Shoes provide the excellent stopping power and are the perfect choice for your next build. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. Pivoting posts aid installation and make toe-in adjustments simple and easy.

The Box Three Prime 9 cassette is a great all-around cassette option. All cogs are stamped from steel and subsequently, the larger ones are pinned to alloy spiders. It also features weight-reducing holes on the cogs. - The Box Three Prime 9 offers ultra-wide ratio with consistent progressions - Prime 9 technology offers the same range as a 12-speed drivetrain, with fewer gears to shift through - Fewer parts, reduced weight, and increased durability - Cogs pinned to lightweight spiders - Constructed using a standard freehub body (HG) - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Drivetrain Speeds: 9 - Designed for ebike: Yes - Color: ED Black

The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminum top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

The Box Two Prime 9 Rear Derailleur is very similar to the Box One version however, to be more wallet friendly, it offers a non adjustable Tri-Pack Clutch, bushing pulleys and some muted finishes. Box Two rear derailleurs are still optimized for 11-50t cassettes and offer durability and performance for the most demanding terrain, just at lower price!

- Heat treated allow steel solid links with solid pins - Compatible with SRAM, Shimano, and Box 11 speed drivetrains - Also compatible with Box's 7 speed downhill specific drivetrain

- Bottom bracket for one-piece crank - Sealed mechanism - 24 TPI - Spindle Type: One piece - Cup Material: Steel - Weight: 310-315g - Cup Type: Press Fit - Cup OD/Bearing OD: 51mm

The BrickTop alloy stem is a classic style, top-mount BMX stem with a 4-bolt handlebar clamp.

- Classic flangeless ribbed BMX style grips - Two-tone swirl pattern - Bar end plugs included - Length: 170mm

- A comfortable and timeless ribbed style grip suitable for BMX, MTB, and cruiser use with included black press-in end caps - Good all-around size for everyday use - Durable Kraton rubber construction - Length: 145mm

Squatch platform pedals have a low-profile, nylon construction and molded traction studs that are easier on the shin in the event of a crash or pedal slip. - EPB bearing system - Spindle size: 9/16-inch

- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation

- Steel - Threads onto 3/8" axle - Knurled & grooved - Diameter: 33mm - Sold in pairs

- Replacement steel sprockets for 1-piece BMX cranks - Mount Compatibility: 1-piece - Teeth: 44T - Chain Compatibility: 1/2 x 3/32" - Tooth Type: Standard

- Replacement steel sprockets for 1-piece BMX cranks - Mount Compatibility: 1-piece - Teeth: 43T - Chain Compatibility: 1/2-inch x 3/32-inch - Tooth Type: Standard

- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 166g pair

- Chromoly construction - Classic BMX design - Material: Cro-Mo - Setback: 0mm

These extremely durable pedals are constructed of a nylon composite thermoplastic body and feature eight removable steel M3 pins per side for superior grip. - One sealed bearing is paired with a long-lasting DU sleeve in each pedal for an impressively smooth interface - Chromoly steel spindle for strength - Spindle size: 9/16-inch

The Cambium C15 All Weather Carved is made for years of hard riding in a forward riding position, and features hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

Globally renowned and truly timeless, the B17 Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style, comfort, and durability.

Designed with the attention to detail and performance levels demanded of Campagnolo by World Tour cyclists, the Centaur is accurate and fast – perfect for long rides. Inheriting top-of-the-range technologies from Revolution 11+ groupsets, the Centaur offers similar performance to professional components. The longer front connecting rod and the carefully designed one-piece steel cage ensure precise and reliable shifting, with minimal effort required to move from the little ring to the big ring. - Long lever arm creates additional torque for improved shifting - One piece steel cage shaped identically to Super Record for similar performance - Shaped outer semi-cage to improve downshifting speed - New rod design allows for higher shifting forces with less rider effort - Drivetrain Speeds: 11 - Double or Triple: Double - Derailleur Capacity: 16 - Front Derailleur Cable Pull: Bottom Pull - Front Derailleur Clamp: Braze-on - Max Ring (teeth): 55 - Weight: 103 grams - Front Der/Shifter Compatibility: Campy Centaur/Potenza/Chorus/Record/Super Record 2015+

Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Hollow pins for reduced weight - NI-PTFE antifriction treatment reduces friction for smooth pedaling, reduced noise, greater efficiency and longer chain life - Links (links): 114 - Width: 5.9 mm - Drivetrain Speeds: 10 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 255 grams

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert - X-Firm

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Our Contour saddle is classic in its design but it's not just form over function. The subtle tail at the rear of the saddle allows you to put a little extra power down without sliding off the back end. Multi-stage foam and dual-coil spring suspension provide a comfortable ride. - Size: 11.25" long x 11" wide - Contoured bucket design - Padding: Multi-stage foam - Suspension: Coil spring - Use: Cruiser - Rail: Steel - Cover material: Soft-Touch vinyl - Gender: Unisex

- 10.5" long x 10.75" wide - Select foam - Vented anatomic relief design - Coil spring suspension - Use: Cruiser - Rail: Steel - Padding: Select Foam - Suspension: Coil Spring - Size (LxW): 10.5x10.75" - Gender: Unisex

- Cloud 9 seat cover featuring comfortable memory foam - Adds a layer of protection and comfort to MTB or cruiser saddles

- Extra plush cruiser style saddle with adequate support for long rides - Corner guards provide durability and scuff resistance - Dimensions: 11 x 12.25-inch

Our Cruiser Select series uses our softest materials and provides a dual layer of comfort. We fuse an extra soft gelfoam pad to the top of our multi-stage foam. This combination is soft yet also supportive. The elastomer suspension evens out imperfections in the road and the airflow channel provides perineal relief and cool air circulation. - Select foam - Vented anatomic relief system - Elastomer spring suspension - Dimensions: 11.25 x 9-inch

Our Cruiser Select series uses our softest materials and provides a dual layer of comfort. We fuse an extra soft gel-foam pad to the top of our multi-stage foam. This combination is soft yet also supportive. The elastomer suspension evens out imperfections in the road and the airflow channel provides perineal relief and cool air circulation. - Size: 11.25" long x 9" wide - Padding: Select foam - Rail: Steel - Suspension: Elastomer spring - Cover: Soft-touch vinyl - Vented anatomic relief system

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 38.6mm, Bronze

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams

TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

- Dispenser of chromed ferrules

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

Dimension Chainrings. - No ramps, pins, or shift aids

Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g

For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - Zero-Rise